Procedure For Replacing Lock Cylinders

The procedure for replacing a lock cylinder is simple. To replace a lock cylinder, you just need to unscrew the two screws that secure the lock cylinder to the ignition lock assembly. After you loosen the screws, you can insert the new lock cylinder. To install the new cylinder, turn the new lock cylinder counterclockwise, until it engages the spring. After that, you should hear a click and the ignition should be locked in place. If you need a duplicate key, visit a locksmith and have them decode your core.

If the cylinder is located in the steering column, you may need to remove the steering column cover to get to it. If your vehicle does not have this, you can use a small screwdriver to remove the cover and access the lock cylinder. Depending on the manufacturer, you may need to remove the steering column switch as well. You may also need a socket wrench or a paper clip. Once you have removed the covers, you can pull the lock cylinder straight out of the housing.

Before you can remove the cylinder, you need to remove the screws that hold it in place. If you do not have these measurements, you may need to purchase a replacement at a local hardware store. Once you have removed the screws, take the cylinder to a safe place to avoid the risk of damaging it. Once you have the cylinder, place the new one in the lock. Make sure to test the lock's locking mechanism to be sure that it will work properly.

If you have to replace a lock cylinder on your car, it's not as difficult as you may think. While most cars come with universal lock cylinders, some have snap-off safety bolt heads that make it difficult to replace the ignition lock. Fortunately, a power drill fitted with special extractors can be used to remove the bolts that hold the ignition switch. If you have the key, you can try the procedure for replacing lock cylinders yourself and save yourself a lot of money.

In some cases, you may find that the ignition lock cylinder is defective and can cause your car to not start. You can temporarily fix this problem by jiggling the key, or you can call a locksmith and have him make a new key based on the lock's model. The steps involved in replacing lock cylinders will vary depending on the type of vehicle you own. If you want to avoid making a mess of things, you should follow the repair instructions provided by your automaker.

If you notice your lock cylinder is malfunctioning, you should replace it immediately. If you have a spare key, you can try opening the car door with the same key. However, your spare key will probably not have the same level of wear and tear as your current one does. A full replacement will be necessary to replace your cylinder. If you have to buy a new lock, you should also buy a new set of keys.